YDB – NG Yamato Diamond Burnishing Tool

Cylindrical, conical, concave, convex and face geometries can be burnished with the diamond tool.
Burnishing can be done up to a step.
The tool consists of 3 parts: Holder – Head – Diamond Tip. Tool change in the desired configuration
can be made by the user.
The tool be delivered with 12×12 – 16×16 – 20×20 – 25×25 – Ø12 holders.
Diamond tips with radius R0.2 – R0.4 – R0.8 – R1.0 – R2.0 can be delivered.
The diamond tip can be connected in 8 different positions by rotating it around itself.
Thus, the life of the diamond is up to 8 times longer.
There are cup springs inside the tool head. Spring pressure can be adjusted with the key delivered with the tool.
The tool head can be rotated -105°/+105°.
It can be worked with a max. speed of 200 m/min. – a feed of 0.2 mm/rev.
Coolant must be used.